RAW Six Shooter

Raw - Six Shooter: All It Takes Is A Couple Of Taps

The Raw Six Shooter enables smokers to effortlessly construct 1, 2, 3, or 6 king-size joints at a time. This device will save your thumbs if you’re the only roller in your group, allowing you to rapidly put together however many joints you need for the sesh ahead. Plus, you won’t have to roll when you’re blazed out of your mind.

Back at solo scale, the RAW Classic Cone Loader funnels one cone at a time with zero spillage drama.

The Six Shooter is formed of a large plastic chamber, a cap, a plate, and a pin/poker.

HOW TO MAKE 1–3 JOINTS AT A TIME

To make 1–3 joints at a time, loosen up the pin and reveal the number of holes you want to use. Once exposed, tighten the pin back up. Load pre-rolled cones into each hole. The Six Shooter is compatible with Raw’s Classic King Size and Organic King Size cones. Grind up your favourite strain and sprinkle in the plant material. The raised lip prevents any herb from spilling out of the top.

Place the cap on and firmly hold it in place. Tap the bottom of the chamber against a hard surface around 8–10 times. This will pack your bud tightly into each cone. Remove the cap and place it upside down on the table. Press the bottom of the chamber down on the cap to push each joint out of its hole. Use the poker to pack each joint down further, as required, and then spark up!

HOW TO MAKE 6 JOINTS AT A TIME

If you’re prepping for a big session, you’ll need to be packing 6 joints at a time. This time, instead of loosening the pin, you’ll need to unscrew it completely and remove it. Now, remove the plate and place the pin back into its hole.

Load each hole with a pre-rolled cone and fill with flower. Secure the cap back in place, hold it tight, and tap the bottom of the chamber to pack each cone. Remove the cap and place it upside down. Remove the joints by pressing the bottom of the chamber against the cap.

Let the sesh commence!